Sanitation technology

Sanitation technology

I told the apprentice to collect the dust from the saw

I told the apprentice to collect the dust from the saw

When you're a badass operator

When you're a badass operator

Now that's attachment

the modern paver laying technology enables a higher work pace

Construction of bridge

Construction of bridge

The underwater room - manta resort pemba, tanzania

The underwater room - manta resort pemba, tanzania

How to move loads in the expansion joints in bridges

How to move loads in the expansion joints in bridges

Foam concrete

also known as foamedconcrete, foamcrete, cellular lightweight concrete or reduced density concrete, is defined as a cement based slurry, with a minimum of 20% (per volume) foam entrained into the plastic mortar.As mostly no coarse aggregate is used for production of foam concrete the correct term would be called mortar instead of concrete.

POST TENSIONED SLAB

The use of post-tensioned reinforcement to construct floor slabs can result in thinner concrete sections and/or longer spans between supports. Designers commonly take advantage of this method to produce buildings and structures with clear open spaces allowing more architectural freedom.

These Safety Gloves Can Withstand Nails Hammers And Knives

These gloves could save your fingers a lot of pain.

They are the mark VIII safety gloves, and they are incredibly robust.

They have a special lining all the way through the fingers.

They are made from nitrile and cotton.

The gloves were designed by a chilean inventor.

He is now looking to manufacture the gloves on a large scale.

Tension and compression

Steel beams used to support giant structures are constantly under an enormous amount of stress. Beams undergo stresses of both compression and tension (stretching)

Shaft Torsional Failure

To understand shafts and why they fail, you need to understand the relationship between stress and strain for steel. Stress is the force carried by a material per unit area, measured in psi (pounds per square inch) or Mpa (Megapascals or Mega Newtons per square meter). 

Diagonal tension cracks in concrete beam and in concrete shearwalls

Shear failure of reinforced concrete beam more properly called diagonal tension failure,is difficult to predict accurately.